How Does Kayak Anchor Trolley Work

What is a Kayak Anchor Trolley?

A kayak anchor trolley is an adjustable pulley system that helps keep the kayaker in one spot while fishing or just enjoying the view. It consists of two main parts: a rope and a carabiner, which attaches to the boat's stern cleat. The rope runs along both sides of the kayak, with one end secured to each side near the bow and stern. A pulley attached to each side allows for easy adjustment of its length.

Table of Contents

How Does it Work?

The anchor trolley works by allowing you to adjust your position relative to any point on shore without having to paddle back or use oars. You simply attach your line at whatever distance from shore you wish and then move around using only your arms for propulsion. When you want to change direction, you can pull on either side of the rope until it reaches your desired location before releasing it again and continuing forward motion.


  • Allows for precise control over positioning relative to shoreline
  • Easily adjustable
  • Can be used in shallow waters where anchoring may not be possible

Kayaking with an anchor trolley provides many benefits compared with traditional methods such as paddling or rowing back when needing repositioning or changing directions. With this device, anglers are able to precisely control their positioning relative to shorelines making it easier for them target specific areas they would like fish in without having worry about drifting away from those spots due strong currents or windy conditions common in open water environments like lakes and oceans..

Kayak anchor trolley diy


A kayak anchor trolley is a great way to keep your kayak in place while fishing or just enjoying the water. It can be used to adjust the position of your anchor line, allowing you to stay in one spot without having to move around too much. Fortunately, building a DIY version of this device isn't difficult and requires only basic materials that are easy to find at any hardware store.

Materials Needed

  • PVC pipe (1/2" diameter)
  • Hose clamps (3/4")
  • Bungee cord (2-3')
  • Carabiner clip
  • Anchor with rope or chain attached

Steps for Assembly #### Step 1: Cut PVC Pipe Cut two pieces of PVC pipe into four equal lengths - each piece should measure about 8 inches long. You will need eight total pieces when finished cutting. #### Step 2: Assemble Trolley Frame Attach all eight pieces together using hose clamps so they form an octagon shape - this will be the frame for your trolley system. Make sure that all connections are secure and tight before moving on to the next step. #### Step 3: Attach Bungee Cord Thread one end of a bungee cord through two opposite sides of the octagon frame and tie it off securely with knots on either side so it won’t come undone easily during use. This bungee cord will act as an elastic band which allows you adjust how far away from shoreline you want your anchor line positioned when deployed in water by pulling or releasing tension on its length accordingly . #### Step 4: Attach Carabiner Clip To complete assembly process attach carabiner clip onto remaining end of bungee cord - this allows you easily attach & detach anchor line from trolley system whenever needed during use out on water .

Hobie kayak anchor trolley kit

Hobie Kayak Anchor Trolley Kit

The Hobie Kayak Anchor Trolley Kit is an essential piece of equipment for any kayaker. This kit provides the necessary tools to securely anchor your kayak in a variety of conditions, allowing you to better control your boat and enjoy a more relaxing time on the water. The trolley kit includes:

  • A rope with adjustable length and stainless steel rings at either end
  • An adjustable pulley system that allows for easy adjustment of the rope’s tension
  • Two swivel clips that attach to existing cleats or eyelets on your kayak

Benefits of Using an Anchor Trolley Kit

Anchoring your kayak with this trolley kit can provide many benefits while out on the water. It helps keep you in one spot if fishing, gives you greater control when paddling against current, and ensures more stability when standing up in choppy waters. Additionally, it can be used as an emergency brake if needed while navigating narrow passages or strong currents.

Easy Installation & Use

Installing the anchor trolley is relatively simple and requires no special tools or skillset; just follow the included instructions! Once installed, adjusting its position is equally straightforward thanks to its pulley system which allows users to quickly adjust their anchoring point without having to untie knots each time they want to reposition themselves.

Kayak anchor trolley danger


A kayak anchor trolley is a system of pulleys and ropes that allow a kayaker to adjust the position of their anchor from inside the boat. While this can be an incredibly useful tool for anglers, it also presents certain dangers if not used properly. The most common risks associated with using an anchor trolley include:

  • Capsizing
  • Getting tangled in the rope or other lines
  • Damage to the boat or equipment

Potential Hazards

When using an anchor trolley, it's important to keep safety in mind at all times. One wrong move could lead to serious consequences such as capsizing or getting caught up in the line and pulled underwater. Additionally, improper use of an anchor trolley may cause damage to your kayak or its accessories like paddles and life jackets. It's best practice to take extra precautions when installing and operating any type of anchoring system on a kayak so as not minimize potential hazards.

Safety Tips

To ensure safe operation when using a kayak anchor trolley, here are some key tips:

  • Make sure you have enough rope length for whatever depth you plan on fishing at; too much rope can create excess drag which will make it difficult for you maneuver your vessel .
  • Securely attach all components including carabiners, clips and knots before heading out onto open water; inspect them regularly throughout your trip for signs of wear-and-tear .
  • Use bright colored cords/ropes so they’re easy to spot in case they get loose while fishing .
  • When attaching anchors directly onto boats avoid sharp edges that could cut into ropes over time .
  • Always keep fingers away from moving parts when adjusting tension levels on pulley systems .
  • Be mindful of wind conditions - strong gusts can quickly turn into dangerous situations if not taken seriously!

Canoe anchor trolley

What is a Canoe Anchor Trolley?

A canoe anchor trolley is an important safety tool for paddlers. It allows them to easily and quickly adjust the position of their anchor line when out on the water. This can be invaluable in strong currents or windy conditions, as it allows paddlers to stay in place without having to constantly readjust their anchor line manually.

Benefits of Using a Canoe Anchor Trolley

Using a canoe anchor trolley provides several benefits that make it an essential piece of equipment for any serious paddlecraft enthusiast:

  • Easily adjustable – The ability to quickly and easily adjust your anchor line's position gives you greater control over where you are anchored and how far away from shore you are located.
  • Improved stability – By providing more consistent anchoring, the trolley helps keep your craft stable while out on the water, even if there are strong winds or currents present.
  • Reduced strain – Instead of having to manually pull up and reset your anchor line each time you want to move locations, using an anchor trolley takes much less effort and reduces strain on both yourself and your boat's hull.


The canoe anchor trolley is an essential piece of safety gear for anyone who spends time paddling out on open waters. Not only does it provide improved stability but also makes adjusting your anchoring location quicker, easier, and with less physical strain than traditional methods require.

Installation of a Kayak Anchor Trolley


Installing a kayak anchor trolley is an essential part of outfitting any kayak for fishing or other activities. A kayak anchor trolley allows the user to adjust the position of their anchor line from the cockpit, providing greater control and versatility when anchoring in different conditions. This guide will provide step-by-step instructions on how to install a kayak anchor trolley on your vessel.

Necessary Materials

  • Kayak Anchor Trolley Kit
  • Drill & Bits
  • Rope Clamps (optional)
  • Marker/Pencil for Marking Holes

Installation Steps

Step 1: Measure and Mark Position of Mounts

Using a marker or pencil, measure and mark where you would like your mounts to be located on each side of the boat. Make sure that these locations are accessible from both sides so that you can attach your rope easily once it has been installed. It is recommended that you place them as close to the centerline as possible for optimal balance when using multiple anchors at once.

Step 2: Drill Pilot Holes and Install Mounts Using a drill with an appropriate bit size, create pilot holes at each marked location before installing your mounts with screws provided in the kit. Once all four mounts have been secured into place, thread one end of your rope through each mount starting from either bow or stern end first depending on preference and desired routing pattern along gunwales/thwart lines etc..

Step 3: Secure Rope Ends With Clamps (Optional) To ensure that your rope does not come loose over time due to wear and tear, it is recommended that you use rope clamps or some form of knot tying technique such as figure 8 loop knots around each mount after passing through it once more before finishing off by tying together both ends near middle point between two pairs of opposing mounts e.g., stern left + bow right = midpoint tie off point etc..

Benefits of Using an Anchor Trolley System

Increased Safety and Security

An anchor trolley system provides increased safety and security when boating. It helps keep the boat in a stationary position, even in windy or choppy conditions. This allows for more accurate casting and improved fishing success. Additionally, it can reduce fatigue from having to constantly adjust the anchor line manually.

Benefits of an Anchor Trolley System:

  • Allows for precise anchoring without manual adjustment
  • Reduces fatigue due to manual labor
  • Improves accuracy when casting lines
  • Keeps boat stable in windy or choppy waters

Easier Maneuverability

Anchor trolleys are also beneficial because they provide easier maneuverability while on the water. They allow you to quickly change your direction without having to worry about adjusting the anchor line manually each time you move. This makes it much easier to explore different areas of a lake or river without spending too much time repositioning your vessel every few minutes. Furthermore, they make docking simpler as well since there is no need for additional adjustments once docked.

Advantages of an Anchor Trolley System:

  • Quickly changes direction with minimal effort
  • Makes docking simpler
  • Easy way to explore different areas of a lake

Maintenance and Care for a Kayak Anchor Trolley

Maintenance of Kayak Anchor Trolley

A kayak anchor trolley is an important piece of equipment for any kayaker. It allows you to easily adjust the position of your anchor line relative to the boat, allowing you to stay in a particular spot without having to constantly readjust your anchor line. To ensure that your anchor trolley works properly and lasts for years, it's important to maintain it regularly. Here are some tips on how to do this:

  • Clean off any dirt or debris from the pulleys and rope with a soft cloth or brush.
  • Inspect all components such as shackles, clips, cleats and other hardware for signs of corrosion or wear. Replace anything that looks worn out or damaged.
  • Lubricate all moving parts with marine-grade lubricant if necessary.
  • Check the rope regularly for fraying or damage and replace when needed.

Care for Kayak Anchor Trolley

Taking care of your kayak anchor trolley is essential in order ensure its longevity and performance over time. Here are some tips on how best to take care of your gear:

  • Store in a cool dry place away from direct sunlight when not in use - UV rays can degrade materials quickly so keeping them indoors is ideal!
  • Rinse off after each use - saltwater can corrode metal components so make sure everything gets rinsed off before storing it away again!
  • Apply protective coatings such as waxes or sealants where applicable - these will help keep rust at bay while also providing additional protection against water damage and wear & tear over time!